Now without wasting much time on flashing the infinix hot note pro lollipop 0703 version, you can head straight to flash the newest version(0828).

Now without wasting much time on flashing the infinix hot note pro lollipop 0703 version,  you can head straight to flash the newest version(0828).

NOTE:
I won't be held responsible if you brick your phone due to not following the below instructions carefully. 

Now, let's do this together.

REQUIREMENTS

-A personal computer

-A good USB to phone cable. 

-SP Flash tool v5. Download Here
-Mediatek vcom driver. Download  Here and see guide installation guideHere
-Your downloaded lollipop update version 0828. See Here
-Make sure you are on infinix hot note pro stock recovery, if you are not, download it Here and flash it with mobile uncle. See guide Here

-Make sure you have fully unrooted your phone
Step by step procedure
1. Extract the lollipop update to a location of your choice on your Pc
2. Extract the SP Flash tool v5 also.
3. Switch off your phone and don't plug it in yet.
4. Open the SP Flashtool extracted, locate and double click on flashtool.exe
5. Go to scatter loading, browse to the infinix rom folder and select the scatter file. 

6. Next,  go to the Download only as seen in the picture below, click on it and select “firmware upgrade” from the drop-down.

7. Now click on the green arrow labelled “Download”. 

8. You can now plug in your switched off phone to your Pc.

9. Relax and wait for the Green check mark arrow as shown below. This may take about 4-7mins

10. After the check confirmation, close the flashtool, disconnect your phone and switch it on. First boot will take some few minutes 

11. That's all.
Kindly hit the comment box if you find this interesting or if you have any question. 

Also Read: